11185467 OMR X 315 White hydraulic orbital motor 315 cm3 with rear ports and 25 mm parallel shaft
SHIPPING WORLDWIDE
The images are indicative and may differ from the final product delivered.
REQUEST PRICE & AVAILABILITY
Availability: Inquire about stock
Price and availabilityPayment and shipping methods
Visa · Mastercard · PayPal · Stripe · Google Pay
DHL · FedEx · UPS
Product identification
- Hidraoil Part number
- GFX105089
- Brand
- White
- Identification number
- 11185467 OMR X 315
- Other numbers
- OMRX 315 OMRX315
- Approximate weight (kg)
- 9,5
Description
Hydraulic orbital motor White (former Danfoss / Sauer Danfoss) OMRX range for high torque and low/medium speed applications.
Feature: assembles Check Valves and High Pressure Shaft Seal (HPS).
Shaft type: Straight shaft 25 mm Diameter and 8 mm Width parallel key.
Flange type: SAE-A Type 2 holes A2 Flange with 82.5 mm centering diameter and 106.4 mm distance between holes.
Displacement: 363.5 cm3/rev.
Rear ports: Threaded 1/2" BSP.
Drain Port: G1/4 Threaded Port (1/4" BSPP)
Velocidad from giro máxima: 165 rpm (intermittent operation: 205 rpm).
Par motor máximo: 400 Nm (intermittent operation: 550 Nm).
Max. Output Power: 7.0 kW (intermittent operation: 8.9 kW).
Max. Pressure Drop: 100 bar (intermittent operation: 140 bar).
Max oil flow: 60 liters/minute (intermittent operation: 75 liters/minute).
Max. starting pressure with unloaded shaft: 7 bar.
Min. starting torque at max. press. drop cont.: 370 Nm.
Min. starting torque at max. press. drop int.: 515 Nm.
Intermittent operation: the permissible values may occur for max. 10% of every minute.
Feature: assembles Check Valves and High Pressure Shaft Seal (HPS).
Shaft type: Straight shaft 25 mm Diameter and 8 mm Width parallel key.
Flange type: SAE-A Type 2 holes A2 Flange with 82.5 mm centering diameter and 106.4 mm distance between holes.
Displacement: 363.5 cm3/rev.
Rear ports: Threaded 1/2" BSP.
Drain Port: G1/4 Threaded Port (1/4" BSPP)
Velocidad from giro máxima: 165 rpm (intermittent operation: 205 rpm).
Par motor máximo: 400 Nm (intermittent operation: 550 Nm).
Max. Output Power: 7.0 kW (intermittent operation: 8.9 kW).
Max. Pressure Drop: 100 bar (intermittent operation: 140 bar).
Max oil flow: 60 liters/minute (intermittent operation: 75 liters/minute).
Max. starting pressure with unloaded shaft: 7 bar.
Min. starting torque at max. press. drop cont.: 370 Nm.
Min. starting torque at max. press. drop int.: 515 Nm.
Intermittent operation: the permissible values may occur for max. 10% of every minute.
More information
- Category: Hydraulic Motors
- Category: Orbital
- Category: Sauer Danfoss
- Category: OMRX
- Category: Rear Ports - Flange A2
- Last updated: 2022-06-05 22:01:00
HidraoilGFX105089
Price and availability
