Product identification

• Hidraoil Part number: GFX107051
• Brand of product: Danfoss
• Part number: OMT200EMD 11106122
• Other numbers: OMT 200 EMD

Description

• Motor hidráulico orbital Danfoss preparado para incorporar el sensor from velocidad from tipo EMD. Este sensor permite detectar la velocidad from giro y el sentido from rotación.
  Shaft type: Straight shaft 40 mm Diameter and 12 mm Width parallel key.
  Flange type: Square 4 holes Flange with 125 mm centering diameter and 160 mm diameter between hole centers.
  Gearwheel set case width (L1): 21.5 mm.
  Displacement: 201.4 cm3/rev
  Side Ports: G3/4 Threaded Ports (3/4" BSPP).
  Drain Port: G1/4 Threaded Port (1/4" BSPP).
  Max speed: 625 rpm (intermittent operation: 750 rpm).
  Max. Torque: 590 Nm (intermittent operation: 710 Nm).
  Max. Output Power: 33.5 kW (intermittent operation: 40 kW).
  Max. Pressure Drop: 200 bar (intermittent operation: 240 bar; peak: 280 bar).
  Max oil flow: 125 liters/minute (intermittent operation: 150 liters/minute).
  Max. starting pressure with unloaded shaft: 10 bar.
  Min. starting torque at max. press. drop cont.: 430 Nm.
  Min. starting torque at max. press. drop int.: 520 Nm.
  Intermittent operation: the permissible values may occur for max. 10% of every minute.
  Peak load: the permissible values may occur for max. 1% of every minute.