151B3008 OMT 250 Danfoss hydraulic orbital motor 250 cm3 with splined shaft 17 teeth
SHIPPING WORLDWIDE
The images are indicative and may differ from the final product delivered.
REQUEST PRICE & AVAILABILITY
Availability: Inquire about stock
Price and availabilityPayment and shipping methods
Visa · Mastercard · PayPal · Stripe · Google Pay
DHL · FedEx · UPS
Product identification
- Hidraoil Part number
- GFX101852
- Brand
- Danfoss
- Identification number
- 151B3008 OMT 250
- Other numbers
- 151B 3008 OMT250
- Approximate weight (kg)
- 21,0
Description
Hydraulic orbital motor Danfoss (former Sauer Danfoss) for applications requiring high Torque at low / medium Speed.
Shaft type: Splined from 17 dientes con diámetro exterior 38,1 mm.
Flange type: Estándar from 4 taladros con centraje from diámetro 125 mm y diámetro from 160 mm entre centros from taladros.
Gearwheel set case width (L1): 27,8 mm.
Displacement: 251,8 cm3/rev.
Side Ports: G3/4 Threaded Ports (3/4" BSPP)
Drain Port: G1/4 Threaded Port (1/4" BSPP)
Max speed: 500 rpm (intermittent operation: 600 rpm)
Max. Torque: 730 Nm (intermittent operation: 880 Nm)
Max. Output Power: 33,5 kW (intermittent operation: 40 kW)
Max. Pressure Drop: 200 bar (intermittent operation: 240 bar; peak load:280 bar)
Max oil flow: 125 liters/minute (intermittent operation: 150 liters/minute)
Max. starting pressure with unloaded shaft: 10 bar
Min. starting torque at max. press. drop cont.: 530 Nm
Min. starting torque at max. press. drop int.: 630 Nm
Intermittent operation: the permissible values may occur for max. 10% of every minute.
Peak load: the permissible values may occur for max. 1% of every minute.
Shaft type: Splined from 17 dientes con diámetro exterior 38,1 mm.
Flange type: Estándar from 4 taladros con centraje from diámetro 125 mm y diámetro from 160 mm entre centros from taladros.
Gearwheel set case width (L1): 27,8 mm.
Displacement: 251,8 cm3/rev.
Side Ports: G3/4 Threaded Ports (3/4" BSPP)
Drain Port: G1/4 Threaded Port (1/4" BSPP)
Max speed: 500 rpm (intermittent operation: 600 rpm)
Max. Torque: 730 Nm (intermittent operation: 880 Nm)
Max. Output Power: 33,5 kW (intermittent operation: 40 kW)
Max. Pressure Drop: 200 bar (intermittent operation: 240 bar; peak load:280 bar)
Max oil flow: 125 liters/minute (intermittent operation: 150 liters/minute)
Max. starting pressure with unloaded shaft: 10 bar
Min. starting torque at max. press. drop cont.: 530 Nm
Min. starting torque at max. press. drop int.: 630 Nm
Intermittent operation: the permissible values may occur for max. 10% of every minute.
Peak load: the permissible values may occur for max. 1% of every minute.
More information
- Category: Hydraulic Motors
- Category: Orbital
- Category: Sauer Danfoss
- Category: OMT
- Category: Splined shaft z17
- Last updated: 2019-01-06 21:32:30
HidraoilGFX101852
Price and availability
