151B3009 OMT 315 Danfoss hydraulic orbital motor 315 cm3 with splined shaft 17 teeth
SHIPPING WORLDWIDE
The images are indicative and may differ from the final product delivered.
REQUEST PRICE & AVAILABILITY
Availability: Inquire about stock
Price and availabilityPayment and shipping methods
Visa · Mastercard · PayPal · Stripe · Google Pay
DHL · FedEx · UPS
Product identification
- Hidraoil Part number
- GFX101853
- Brand
- Danfoss
- Identification number
- 151B3009 OMT 315
- Other numbers
- 151B 3009 OMT315
- Approximate weight (kg)
- 22,0
Description
Hydraulic orbital motor Danfoss (former Sauer Danfoss) for applications requiring high Torque at low / medium Speed.
Shaft type: Splined from 17 dientes con diámetro exterior 38,1 mm.
Flange type: Estándar from 4 taladros con centraje from diámetro 125 mm y diámetro from 160 mm entre centros from taladros.
Gearwheel set case width (L1): 37 mm
Displacement: 326,3 cm3/rev.
Side Ports: G3/4 Threaded Ports (3/4" BSPP)
Drain Port: 1/4" GAS
Max speed: 380 rpm (intermittent operation: 460 rpm)
Max. Torque: 950 Nm (intermittent operation: 1140 Nm)
Max. Output Power: 33,5 kW (intermittent operation: 40 kW)
Max. Pressure Drop: 200 bar (intermittent operation: 240 bar; peak load:280 bar)
Max oil flow: 125 liters/minute (intermittent operation: 150 liters/minute)
Max. starting pressure with unloaded shaft: 10 bar
Min. starting torque at max. press. drop cont.: 740 Nm
Min. starting torque at max. press. drop int.:890 Nm
Intermittent operation: the permissible values may occur for max. 10% of every minute.
Peak load: the permissible values may occur for max. 1% of every minute.
Shaft type: Splined from 17 dientes con diámetro exterior 38,1 mm.
Flange type: Estándar from 4 taladros con centraje from diámetro 125 mm y diámetro from 160 mm entre centros from taladros.
Gearwheel set case width (L1): 37 mm
Displacement: 326,3 cm3/rev.
Side Ports: G3/4 Threaded Ports (3/4" BSPP)
Drain Port: 1/4" GAS
Max speed: 380 rpm (intermittent operation: 460 rpm)
Max. Torque: 950 Nm (intermittent operation: 1140 Nm)
Max. Output Power: 33,5 kW (intermittent operation: 40 kW)
Max. Pressure Drop: 200 bar (intermittent operation: 240 bar; peak load:280 bar)
Max oil flow: 125 liters/minute (intermittent operation: 150 liters/minute)
Max. starting pressure with unloaded shaft: 10 bar
Min. starting torque at max. press. drop cont.: 740 Nm
Min. starting torque at max. press. drop int.:890 Nm
Intermittent operation: the permissible values may occur for max. 10% of every minute.
Peak load: the permissible values may occur for max. 1% of every minute.
More information
- Category: Hydraulic Motors
- Category: Orbital
- Category: Sauer Danfoss
- Category: OMT
- Category: Splined shaft z17
- Last updated: 2019-01-15 21:24:08
HidraoilGFX101853
Price and availability
