Product identification

• Hidraoil Part number: GFX102040
• Brand of product: Danfoss
• Part number: 151B3310 OMV 800
• Other numbers: 151B 3310 OMV800

Description

• Hydraulic Orbital Motor for Low speed and High Torque applications.
  Shaft type: Straight shaft 50 mm Diameter and 14 mm Width parallel key.
  Flange type: Square 4 holes Flange with 160 mm centering diameter and 200 mm diameter between hole centers.
  Gerotor/Geroller width (L1): 61,5 mm.
  Displacement: 801,8 cm3/rev.
  Side Ports: G1 Threaded Ports (1" BSPP).
  Drain Port: G1/4 Threaded Port (1/4" BSPP)
  Max speed: 250 rpm (intermittent operation: 300 rpm).
  Max. Torque: 1880 Nm (intermittent operation: 2110 Nm).
  Max. Output Power: 42,5 kW (intermittent operation: 48 kW).
  Max. Pressure Drop: 160 bar (intermittent operation: 180 bar; peak load:210 bar).
  Max oil flow: 200 liters/minute (intermittent operation: 240 liters/minute).
  Max. starting pressure with unloaded shaft: 8 bar.
  Min. starting torque at max. press. drop cont.: 1510 Nm.
  Min. starting torque at max. press. drop int.: 1700 Nm.
  Maximum inlet pressure: 210 bar (intermittent operation: 250 bar; peak load:300 bar).
  Maximum return pressure with drain line: 140 bar (intermittent operation: 175 bar; peak load:210 bar).
  Intermittent operation: the permissible values may occur for max. 10% of every minute.
  Peak load: the permissible values may occur for max. 1% of every minute.