Hydraulic Orbital Motors Start-up and Assembly instructions

VERY IMPORTANT orbital hydraulic motor

The moment of installing and commissioning an orbital type hydraulic motor is very important, so the installer must consider the following general assembly instructions:

Have assimilated the basic concepts of hydraulic systems. If they do not fully understand them or if the process of replacing a hydraulic motor is beyond their competence, it is recommended to seek assistance from a qualified professional with experience to avoid possible personal injury or damage to the hydraulic system during the assembly and commissioning processes of the hydraulic motor.

Fill the hydraulic motor case with oil through its inlet/outlet/drain connections before connecting the hydraulic pipes/hoses to the hydraulic motor.

filling the hydraulic motor case with oil

The oil used in the hydraulic system must be completely clean of impurities before installing the hydraulic motor. Also clean the internal walls of the hydraulic reservoir.

The hydraulic system (motor, cylinders, pump, pipes, fittings, and other components) must be completely purged to avoid air in the hydraulic circuit.

Check the condition of the connections and their seals, the condition of the rigid/flexible pipes, and the condition of the reservoir. Ensure there are no leaks or air entering the circuit (cavitation).

The type of hydraulic oil must be suitable for the hydraulic motor and the hydraulic system itself as well as for the temperature range for which the hydraulic motor and hydraulic system have been designed.

Change the filters and add clean hydraulic oil.

Reduce the pressure of the safety valves to the minimum. Run the motor without load at minimum speed and with zero (or minimum) pressure for several minutes and gradually increase the rpm and pressure to the level recommended by the machine manufacturer.

Avoid axial and radial stresses on the orbital hydraulic motor shaft as much as possible.

The diameters of pipes, hoses, fittings, accessories, and other components of the oil flow must be properly dimensioned and in accordance with the maximum oil flow that may be in the hydraulic system.

All hoses and piping of the hydraulic circuit must be free of very tight bends.

To reduce the level of vibrations, it is recommended to use flexible piping instead of rigid piping.

These instructions are general for orbital hydraulic orbital motors. Each motor model may have its corresponding manufacturer's specifications, so in case of doubt, the specific catalog of your hydraulic motor model must be consulted.

Ensure that all required procedures are carried out correctly; otherwise, the manufacturer's warranty would be invalidated.

Create Date: 2024-06-13 21:53:00

Update date: 2024-08-21 09:00:00

FEATURED HYDRAULIC BRANDS

SHIPPING WORLDWIDE

Let us assist you in choosing the perfect hydraulic component for your machine or upcoming project. We offer expedited shipping to anywhere in the world through top logistics companies such as DHL Express, TNT, FedEx or UPS.

CONTACT US

Need a quotation or help identifying a component? Send us the reference or a photo.

info@hidraoil.com Contact Form WhatsApp · (+34) 630 708 584 Call us · (+34) 630 708 584